BINNS & BERRY Trident L850 Centre Lathe x 120” Between Centres with Hydraulic Copying and DRO – Rebuilt 2009

Description

Maximum swing over bed 940mm. Swing over cross slide 680mm. Distance between centres 3048mm. Overall width of 3 shear bed 720mm. Width of 2 rear shears 340mm. Speed range – Geared (Low) 4 – 60 rpm (High). 60-280 rpm. Belt Driven 280 – 1250rpm (infinitely variable). Main motor 23 kW. Spindle nose (Camlock) D1/11. Spindle bore 104mm.  Range of feeds longitudinal per rev 0.017mm – 1.75mm. Range of feeds cross per rev 0.013 – 1.27mm. Screwcutting: Number of TPI 90.Range of TPI 112 – 6. Number of linear pitches 63. Range of linear pitches 1/32 – 7. No. of diametral pitches 78. Range of diametral pitches 1- 448. Number of metric pitches 80. Range of metric pitches 0.5 -112. Number of modules 37. Range of modules 0.125 – 28. Cross slide travel 500mm. Compound slide travel 300mm. Tool section 32mm x 25mm. Rapids Longitudinal/ Cross 4500mm/3000mmmin. Swivel compound slide. Tailstock quill dia. 139mm. Quill taper 6 MT. Quill travel 280mm. Lateral adjustment of tailstock +/- 12mm. Machine complete with 400mm dia. 3 jaw chucks. 900mm dia. 4 jaw chuck. 4 way toolpost. Full Length Hydraulic Copying Attachment. 720mm dia. 3 Point roller steady. Newall Topaz DRO. Sliding interlocked chuck guard. Coolant Pump. Emergency safety stop. Lo Volt Light. Machine was rebuilt and fitted with full length hydraulic copying and little used since. Condition is excellent. Overall Dimensions L X W X H 5,160mm x 2,240mm x 1,900 mm. Approximate weight 9.000 kgs